1. General description
The system is designed according to the municipal water quality requirements. The configuration and setting of the system can meet the requirement of the water inlet completely. The principle of energy saving, simple operation and safety is ensured, and the system can run stably for a long time.

1T raw water tank ( user owned ) stainless steel water tower:
1. Raw water pump ( 1 set )
Model | CHL 4-40 | Flow | 2m3 |
Lift | 25 m | Material | SUS 304 |
Motor power | 0.55KW |
| |
2.Multimedia filter ( 1 set )
Model | WAVE-1254 | Type | Vertical cylinder |
Material | Stainless steel | Flow | 2m3/h |
Diameter | 400 mm | Total filter height | 600 mm |
Working pressure | 0.3 MPa | Filter material | Refined quartz sand (coarse and fine ) |
Washing way | Manual multitandem valve wash |
3. Activated carbon filter ( 1 set )
Model | WAVE-1254 | Type | Vertical cylinder ( upper opening ) |
Material | Stainless steel | Flow | 2m3/h |
Diameter | 400 mm | Total filter height | 600 mm |
Working pressure | 0.3 MPa | Filter material | Activated carbon |
Washing way | Manual multitandem valve wash |
4. Precision filter ( 2 sets )
Filter model | S-230 | Filter type | Vertical cylinder |
Material | Stainless steel | Manufacturing plant | Shanghai |
Filter element model | PP-20 | Filter element material | PP |
Filter element aperture | 5UM | Filter element amount | 3 pcs |
5. The first level reverse osmosis host ( 1 set )
Model | FGW-1 | Total water | 1 L/h |
Water recovery rate | 55% | Desalination rate | 97% |
Water supply condition | (1) water temperature:5-40℃ (2)water pressure: 0.2MPa (3) water supply SDI: ≤4 (4)residual chlorine: ≤0.1mg/L (5)PH: 3-11 (6)control way: automatic control |
5.1. High pressure pump
Model | CDL 2-150 | Flow | 1.5m3 |
Lift | 118 m | Material | Stainless steel SUS 304 |
Motor power | 1.1 KW |
| |
5.2. Reverse osmosis filter shell ( pressure container )
Model | 4040-2 | Amount | 2 pcs |
Length | 2016 mm | Diameter | 106 mm |
Material | SUS 304 |
| |
5.3. Reverse osmosis filter ( 4 pcs )
Model | 4040 | Minimum desalination rate | 99% |
Length | 1016 mm | Diameter | 99 mm |
Material | Aromatic polyamide | Filter area | 85 ft2 |
Permeability | 7.2 T/d | Place of origin | U.S. Hyde ESPA2 |
5.4. Flow meter
Model | Z-3002 | Range | 20 L/m |
Material | Transparent plexiglass | Type | Panel mounting |
Place of origin | USA Distribution |
5.5. Conductivity table ( 1 set )
Model | EOTCM-230 | Range | 0-100uS/cm |
Measuring way | Online measurement |
| |
5.6. Pressure gauge ( 4 sets )
Model | EOTYZ-25 | Range | 0-2.5MPa |
Type | Oil immersed shock proof | Installation way | Panel mounting |
5.7. IC controller ( 1 set )
Model | YIC-1 | Place of origin | OSMON |
5.8. Time clock ( 1 set )
Model | H7ET | Place of origin | U.S. OMRON |
5.9. Water inlet solenoid valve ( 1 set )
Model | 2231020B | Caliber | G3/4 |
Power | 220V | Place of origin | German BURKERT |
5.10. Concentrated water solenoid valve ( 1 set )
Model | 2231020B | Caliber | G1/2 |
Power | 220V | Place of origin | German BURKERT |
5.11. Pressure switch ( 1 set )
Model | LS-600 | Pressure range | 0-0.6MPa |
Place of origin | Taiwan |
5.12. Bracket
Material | SUS 202 | Type | Whole bracket with casters |
Place of origin | Earth Orbit Technologies Inc. |
5.13. The tube
Material | UPVC | Place of origin | Domestic |
5.14. The level pure water tank ( 1 set )
Mode l | T-1000 | Material | SUS 304 stainless steel plain water tower |
Volume | 1 000 L |
| |
Enclose | Liquid level switch (1)model: EOTST-90ab; (2)place of origin: |
5.15 Dosing installation ( 1 set ) add NAHO
Model | X015 | Flow | 2.76 L/H |
Place of origin | U.S. | Enclose | Dosing tank 1 piece |
Pure water post-processing system
1. Electronic control system
Name | Electric box | Material | Stainless steel |
Name | Time reply | Amount | 1 set |
Name | Electrical components | Amount | 1 batch |
2. Pure water tank ( 1 set )
Model | T-1000 | Material | SUS 304 Stainless steel plain water tower |
Volume | 1 000 L |
| |
Enclose | Liquid level switch (1) model: EOTST-90AB (2)Place of origin: |
3. Pure water pump (1 set)
Model | CHL 2-30 | Flow | 2m3 |
Lift | 25m | Material | SUS304 |
Motor power | 0.55KW |
| |
4. UV sterilizer
Model | HE-720 | Flow | 1 T/H |
Lamp type | T 565 | Inlet and outlet | 1’’external screw thread |
5. Tube, pipe fittings another (1 batch of 1 diameter )
Tube | Stainless steel SUS304 | 3/4” | |
Butterfly valve | Stainless steel SUS304 | 3/4” | |
Other pipe fittings | Stainless steel SUS304 | 3/4” | 1 batch |
Equipment quotation:
500 L/H two stage reverse osmosis (USD): 2.85 ( the circulation tube is calculated according to the actual amount)
- Maintenance of water treatment equipment
- Quartz sand should be replaced after 1-2 years.
- Activated carbon needs to be replaced after using 1-2 years ( running 6 hours a day ).
- Filter element change once or twice at least a month for two times (not washable,reused).
- Wash the film in time according to pressure difference (about 1-2 times a year).
- Disinfect the system, tubes and tanks regularly.
- Regular manual low pressure cleaning film ( Adjust to film pressure to 2-3KG ).
The reverse osmosis membrane has a life span of about 2-3 years (according to the local raw water quality ).
- Regularly modify the optimum operating pressure.
- Perform a standardized operation record.